Activitate

Installing a fence made of vinyl yourself will provide security, keep your family dog corralled and enhance the appeal of your home for many years to in the future. It is possible to save money by installing a fence made of vinyl at home, but only if you follow all the proper installation procedures.

Although not many people like the thought of spending the weekend mixing concrete or drilling many holes, many are able to install vinyl fencing. According to data gathered from HomeAdvisor and its community of service professionals the handy homeowners could save as much as one-third of the cost of a new fence by replacing professional labor costs by using a bit of elbow grease.

Before diving into a project unprepared, consider the most likely dangers. Unintentionally ignored building regulations, poorly placed posts and lack of preparation can cause problems that quickly eat into those savings and shorten the life of your fence. You want your vinyl fence to last as a testament to your abilities as a DIYer. Here are some of the most important do’s and don’ts.

Prepare your yard

Begin prepping your yard for the installation by calling 811 (or visiting call811.com) to arrange the times that your utility companies are scheduled to visit. The majority of them will bury lines around your home, so you’ll need representatives from every company to mark the location of said lines. The process can take about an entire week, but don’t skip it. Digging in the dirt without knowing what’s beneath can be dangerous. A shovel that hits an electric line can result in serious injuries, or death.

asking2expert.com is essential to check your property’s line of property prior to erecting a fence at the boundary of your property. Examine your deed or visit the local assessor’s office. Although this may be uncomfortable, it’s a lot better to removing a fence you inadvertently built in the neighbor’s yard!

After you have located the utility lines and established your property line , mark your fence perimeter with brightly colored spray paint. Then, clean up any plants, rocks, or any other debris getting in the way.

Do not put posts that are too close together.

Vinyl fencing bends without breaking, which allows it to withstand strong winds and minor hits. The proper installation of vinyl fences is essential for this flexibility. If you place the posts too close to each other the fence panels will become rigid. The vinyl is unable to bend, which increases the chance that strong winds or an object that is errant could cause damage to the fence. You can avoid this issue by spacing your posts a whole width apart, and avoid having to cut the panel in a smaller dimension whenever feasible.

Also, keep in mind that, just like wood, vinyl fencing expands and expands and contracts. As wood expands when exposed to moisture, vinyl expands during hot temperatures. If you fit the fence panels too tightly in between the posts, there will be no room to accommodate this expansion which could result in warping or buckling. To avoid this occurring, every panel should have a couple of millimeters of room to move after installation.

Don’t dig shallower holes

The fence you build is only as strong as the posts that hold it up. So, make sure you ensure that each post is securely placed in the ground, especially when you live in an area with strong winds or soft soil. Posts with holes that are shallow are more likely to slide against the weight of the fence, or be blown over completely in extreme weather.

How deep are fence posts required to be? Although the climate and soil conditions may affect the depth requirements The general guideline is to permit 1/3 of the length of the fence to be within soil. A further 6 inches of gravel is needed to drain the water away from the posts. So, if you’re planning on setting a post 3 feet deep it is necessary to dig a hole that is 3 feet 6 inches deep to account for the gravel layer.

DO install the corner and end posts first.

A successful installation of a vinyl fence requires an exact alignment of the posts. Given how difficult the process of installing posts could be, you do not want to have to dig out the post to reinstall it because you didn’t align it with the other posts. Get rid of the confusion by installing the end posts and posts that are in the corners first. Once they are in place, stretch a string line through the posts, making sure the line is straight. Then, utilize the string line to guide you around all the posts.

DOcertainly not neglect an amount

While you may want to speed up the process by observing whether or not your posts are level, do not do it. A quality level is the most effective method of determining if each post is level and the same height as the rest of them.

When you have put up a new post and prior to the concrete having set, check that it is in plumb by placing a level over two adjacent sides or by using the post level. A string line should be placed between the posts at the corners and the end posts to make sure they are equal in height. Use a string line-level or bench level to confirm the line is level, and then verify that each post in between meets the string line, making adjustments to the posts’ heights as required.